Industrial dry screw vacuum pump for oil-free vacuum applications

A dry screw vacuum pump is an oil-free positive-displacement vacuum pump that uses two synchronized helical rotors to transport and compress gas. Its non-contacting rotor design eliminates the need for sealing oil inside the pumping chamber, helping reduce process contamination and support clean vacuum operation. It is widely used in chemical processing, pharmaceutical manufacturing, semiconductor production, solvent recovery, and other industrial applications.

This guide explains the working principle, main components, pump types, advantages, and industrial applications of dry screw vacuum pumps. It also compares constant-pitch and variable-pitch designs, outlines key selection and maintenance considerations, and introduces DV Vacuum's DVS series solutions.

1. What Is a Dry Screw Vacuum Pump?

A dry screw vacuum pump is a positive-displacement vacuum pump that uses two synchronized helical rotors to move gas from the inlet to the exhaust. The rotors rotate in opposite directions inside a specially designed housing, creating enclosed spaces that transport and compress gas along the rotor axis.

The term "dry" refers to the pumping chamber. Unlike oil-sealed or liquid-ring vacuum pumps, a dry screw vacuum pump does not use oil or another sealing liquid inside the compression chamber to generate vacuum. The screw rotors operate with carefully controlled clearances rather than making direct contact with each other or the pump housing.

This design helps prevent process gas from mixing with sealing oil and reduces the risk of oil contamination in the vacuum stream. It is particularly useful in applications involving solvents, chemical vapors, pharmaceutical processing, and other processes that require clean vacuum conditions.

Key Point: A dry screw vacuum pump generates vacuum through synchronized, non-contacting screw rotors. Its oil-free pumping chamber helps maintain process cleanliness, but the suitability of the pump still depends on the gas composition, temperature, dust load, condensable vapor content, and operating conditions.

Dry Screw Vacuum Pump vs. Oil-Sealed Vacuum Pump

The main difference between these technologies is how they seal and operate within the pumping chamber. Oil-sealed pumps use oil for sealing, lubrication, and cooling in the pumping mechanism, while dry screw pumps use rotor geometry and controlled clearances to transport gas without a liquid sealing medium in the compression chamber.

Comparison Dry Screw Vacuum Pump Oil-Sealed Vacuum Pump
Pumping Chamber Dry, without sealing oil Uses oil for sealing and lubrication
Process Contamination Low risk of oil contamination from the pumping chamber Oil migration may affect process cleanliness
Operating Fluids No sealing liquid in the compression chamber Requires vacuum pump oil
Maintenance Does not require routine pumping-chamber oil changes Requires oil inspection and replacement
Typical Applications Chemical, pharmaceutical, solvent recovery, electronics General industrial vacuum and applications compatible with oil-sealed operation

2. How Does a Dry Screw Vacuum Pump Work?

The working principle of a dry screw vacuum pump is based on the synchronized rotation of two helical rotors. These rotors create a series of gas chambers that move continuously from the suction side to the discharge side. As the gas travels through the pump, its volume is reduced and its pressure increases before it is discharged.

Step 1: Gas Enters Through the Inlet

Process gas enters the pump through the suction port and fills the spaces formed between the screw rotors and the pump housing. The synchronized rotors create sealed or partially enclosed gas pockets that capture the incoming gas.

Step 2: Synchronized Rotors Transport the Gas

The two screw rotors rotate in opposite directions while maintaining precise clearances. Timing gears synchronize their movement and prevent direct contact between the rotors. The trapped gas is then transported axially along the screw chamber toward the exhaust side.

Step 3: Gas Is Compressed

As the gas moves toward the outlet, the available chamber volume changes according to the rotor geometry. In pumps with internal compression, the gas is progressively compressed before reaching the discharge port. The screw pitch and rotor profile influence the compression process, discharge temperature, and energy requirements.

Step 4: Compressed Gas Is Discharged

When the gas reaches the exhaust port, it is released from the pumping chamber. The continuous rotation of the screw rotors maintains a steady gas-transport process, allowing the pump to operate continuously under suitable conditions.

Important Operating Principle: The pumping chamber remains oil-free, but the pump may still contain lubricated bearings, timing gears, and other components outside the process chamber. Correct shaft sealing and isolation are important to prevent lubricants from entering the process stream.

3. Main Components of a Dry Screw Vacuum Pump

The performance of a dry screw vacuum pump depends on the design and coordination of several mechanical and auxiliary components. Each part contributes to gas transport, rotor synchronization, temperature control, and process protection.

1. Screw Rotors

The screw rotors are the main pumping elements. Their helical profiles and clearances determine how gas is captured, transported, and compressed. Rotor geometry, pitch, surface finish, and dimensional accuracy can influence pumping speed, ultimate pressure, energy consumption, and operating stability.

2. Pump Housing

The housing encloses the rotors and forms the pumping chamber. It must maintain accurate rotor clearances under operating temperatures and mechanical loads. Depending on the process, the housing may also require special surface treatments or corrosion-resistant coatings.

3. Timing Gears

Timing gears synchronize the two screw rotors so they rotate at the correct relative positions without touching each other. Accurate synchronization helps maintain stable clearances and reduces the risk of rotor interference during operation.

4. Bearings and Shaft Seals

Bearings support the rotating shafts, while shaft seals help isolate the pumping chamber from external components. Seal arrangements may include lip seals, mechanical seals, and optional air or nitrogen barrier protection, depending on the pump design and process requirements.

5. Cooling System

Compression generates heat inside the pump. A water-jacket cooling system helps control operating temperatures and supports continuous-duty operation. Cooling capacity should be matched to the pump model, process gas, ambient conditions, and operating load.

6. Motor and Drive System

The motor supplies the mechanical power needed to rotate the screw rotors. Some configurations also support variable-frequency drive control, allowing the rotational speed and pumping rate to be adjusted according to process demand.

4. Constant-Pitch vs. Variable-Pitch Dry Screw Vacuum Pumps

Dry screw vacuum pumps can use different rotor geometries and compression arrangements. Constant-pitch and variable-pitch designs are two configurations used in industrial vacuum systems. Their differences affect how gas moves through the pumping chamber and how internal compression is achieved.

Constant-Pitch Dry Screw Vacuum Pump

A constant-pitch screw design uses a consistent pitch along the rotor length. Gas is transported through the pumping chamber as the rotors turn, with the overall compression behavior determined by the rotor profile, chamber geometry, and discharge arrangement.

This configuration can be suitable for industrial processes requiring stable gas transportation and continuous vacuum operation. The exact performance depends on the model, rotor geometry, process gas, and operating pressure.

DV Vacuum's DVS Constant-Pitch Dry Screw Vacuum Pump Series includes models with pumping speeds from 150 to 600 m³/h and a stated ultimate pressure of 10 Pa.

Variable-Pitch Dry Screw Vacuum Pump

A variable-pitch design uses screw rotors with changing pitch along their length. This geometry can create internal gas compression as the gas travels from the inlet toward the exhaust. The compression profile is designed to help manage discharge temperature and energy consumption under process loads.

Variable-pitch designs may be useful for applications involving solvent vapors, condensable gases, and demanding industrial vacuum processes. However, the actual operating suitability must be assessed according to the gas properties, vapor pressure, condensation risk, and required duty cycle.

DV Vacuum's DVS Variable-Pitch Dry Screw Vacuum Pump Series offers models with pumping speeds from 160 to 1,100 m³/h and a stated ultimate pressure of 10 Pa.

Comparison Constant-Pitch Design Variable-Pitch Design
Rotor Geometry Consistent screw pitch Changing screw pitch along the rotor
Gas Transport Continuous axial gas transportation Continuous axial transportation with internal compression design
Compression Characteristics Depends on rotor profile and discharge arrangement Designed to provide progressive internal compression
Typical Considerations Stable pumping and process compatibility Discharge temperature and energy performance under process loads
DV Vacuum Model Range DVS-150 to DVS-600 DVS-160V to DVS-1100V

Neither design is automatically suitable for every process. Buyers should compare actual pumping curves, gas composition, operating pressure, temperature limits, and energy requirements before selecting a configuration.

Dry screw vacuum pump rotor and equipment configuration

5. Key Advantages of Dry Screw Vacuum Pumps

Dry screw vacuum pumps are used in industrial processes where clean vacuum generation, continuous operation, and compatibility with process gases are important. Their advantages come from the non-contacting rotor design and the absence of sealing oil in the pumping chamber.

1. Oil-Free Pumping Chamber

The pumping chamber does not require oil for gas sealing or compression. This reduces the risk of oil contamination in the process stream and eliminates routine oil replacement within the pumping chamber. It is especially beneficial for applications involving sensitive products or solvent recovery.

2. Reduced Process Contamination

Because process gas does not pass through an oil-filled compression chamber, the risk of oil backstreaming into the vacuum system is reduced. This supports cleaner operation in pharmaceutical, chemical, and electronics manufacturing processes.

3. Suitable for Selected Solvent and Vapor Applications

Dry screw pumps can be configured for processes involving water vapor and solvent vapors. Their oil-free pumping chamber can simplify downstream solvent recovery and reduce the risk of mixing process materials with pump oil. Proper temperature control and process configuration are still necessary to prevent unwanted condensation or deposits.

4. Continuous Industrial Operation

The synchronized screw rotor arrangement supports continuous gas transportation. With appropriate cooling, sealing, and process protection, dry screw vacuum pumps can be used in demanding industrial duty cycles.

5. Flexible Material and Coating Options

Different process gases may require different levels of corrosion protection. Depending on the pump model, available options may include electroless nickel plating, Hastelloy-based coatings, or polymer composite coatings. Selecting the correct treatment requires an assessment of the chemical composition, concentration, temperature, and exposure time.

6. Integration with Roots Vacuum Boosters

A dry screw vacuum pump can be combined with a Roots vacuum booster to increase the overall pumping speed of a vacuum system. The combination may be useful when a process requires faster evacuation or higher gas-handling capacity. The booster and backing pump should be selected as a coordinated system.

Application Note: Oil-free operation does not mean that every gas can be pumped without additional protection. Strongly corrosive gases, high dust concentrations, flammable media, and heavy liquid carryover may require special materials, filtration, purge systems, or customized configurations.

6. Industrial Applications of Dry Screw Vacuum Pumps

Dry screw vacuum pumps are used across multiple industries because they can provide oil-free vacuum generation and can be configured for selected vapor-rich or chemically demanding processes. The required pump design depends on the gas characteristics, vacuum level, pumping speed, and production conditions.

1. Chemical Processing

Chemical production often involves solvents, corrosive vapors, and processes that require controlled pressure conditions. Dry screw vacuum pumps can be used in vacuum distillation, solvent recovery, concentration, evaporation, and reactor vacuum applications.

For aggressive process media, buyers should evaluate corrosion-resistant coatings, shaft sealing arrangements, purge requirements, and the compatibility of all gas-contacting materials.

2. Pharmaceutical Manufacturing

Pharmaceutical production may involve vacuum drying, solvent removal, filtration, concentration, and other operations that require clean process conditions. An oil-free pumping chamber helps reduce the risk of oil contamination and can support controlled production environments.

The pump configuration should be selected according to the solvents, cleaning procedures, vapor loads, and operating temperatures involved in the process.

3. Semiconductor and Electronics Manufacturing

Electronics and semiconductor processes may require stable vacuum conditions for coating, deposition, drying, and material treatment. Dry screw vacuum pumps can be integrated into vacuum systems where oil-free operation and process compatibility are important.

Applications involving reactive gases or corrosive process chemicals may require special coating and sealing configurations. Gas compatibility should be confirmed before installation.

4. New Energy and Photovoltaic Production

New-energy manufacturing includes vacuum processes used in photovoltaic production, battery material processing, drying, and other production stages. Dry screw pumps can provide oil-free gas handling for selected applications where process cleanliness and reliable vacuum generation are required.

5. Vacuum Drying and Freeze-Drying

Vacuum drying and freeze-drying processes remove moisture or solvents under reduced pressure. Dry screw vacuum pumps can serve as part of the vacuum system, helping evacuate water vapor and other process gases. The pump must be sized according to the vapor load, operating pressure, and required drying cycle.

6. Industrial Furnaces and Heat Treatment

Vacuum furnaces and heat-treatment systems use reduced pressure to control the processing atmosphere and limit unwanted reactions. Dry screw pumps can be used as backing pumps or as part of a larger vacuum arrangement, depending on the furnace design and required vacuum level.

Industry Typical Process Important Pump Requirements
Chemical Distillation, solvent recovery, concentration Corrosion resistance, vapor compatibility, sealing
Pharmaceutical Vacuum drying, filtration, solvent removal Clean operation, material compatibility, process control
Semiconductor and Electronics CVD, coating, vacuum processing Stable vacuum, clean pumping, gas compatibility
New Energy Photovoltaic processing, material drying Suitable pumping speed, continuous operation
Industrial Furnaces Vacuum heat treatment and thermal processing Required pressure range, system integration
General Manufacturing Vacuum drying, degassing, evacuation Capacity, operating pressure, service requirements

7. How to Choose the Right Dry Screw Vacuum Pump

Selecting a dry screw vacuum pump requires more than comparing motor power or nominal pumping speed. The pump must match the process gas, required vacuum level, operating cycle, and installation conditions. Reviewing these factors before purchasing can help prevent undersizing, unnecessary energy consumption, and premature equipment problems.

1. Determine the Required Ultimate Pressure

Ultimate pressure is one of the basic performance indicators of a vacuum pump. It describes the lowest pressure the pump can achieve under specified test conditions. Buyers should distinguish between the pump's ultimate pressure and the actual working pressure required by the production process.

Consider the pressure range during startup, normal operation, and process shutdown. If the system requires a deeper vacuum than one pump can provide efficiently, a Roots booster or another staged vacuum arrangement may be necessary.

2. Calculate the Required Pumping Speed

Pumping speed affects how quickly a vacuum system can evacuate gas and maintain the required pressure under process loads. The correct capacity depends on chamber volume, gas throughput, leakage, vapor generation, and the required pump-down time.

A pump that is too small may not maintain the required operating pressure. An oversized pump may increase initial investment and energy consumption without providing a meaningful process benefit.

3. Identify the Process Gas and Chemical Composition

Provide a complete list of gases and vapors that will enter the pump. Include their concentrations, temperatures, vapor pressures, corrosive properties, and potential reactions. Also identify whether the process contains solvents, water vapor, dust, or condensable substances.

For strongly corrosive gases, the pump may require special rotor or housing coatings, compatible sealing materials, and additional purge protection. High dust loads may require inlet filtration or other protective equipment.

4. Evaluate Condensation and Liquid Carryover Risks

Condensable gases can form liquid inside the pump if their temperature and pressure conditions cross the relevant dew point. Liquid accumulation may affect rotor clearances, operating loads, and pump reliability.

Evaluate vapor concentration, inlet temperature, cooling conditions, and expected process fluctuations. Depending on the application, a condenser, separator, controlled purge, or customized pump configuration may be required.

5. Select Suitable Materials and Anti-Corrosion Coatings

The pump housing, rotors, seals, and other gas-contacting components must be compatible with the process medium. Common coating options may include electroless nickel plating, Hastelloy-based treatments, and polymer composite coatings.

Do not select a coating based only on a general description such as "chemical resistant." Confirm its compatibility with the actual chemical, concentration, temperature, and exposure conditions.

6. Check Cooling and Shaft Sealing Requirements

Dry screw pumps generate heat during gas compression. A water-jacket cooling system helps manage the operating temperature, while the shaft sealing arrangement protects the process chamber and external components.

Confirm cooling-water temperature, flow rate, pressure, connection size, and water quality. For hazardous or sensitive process gases, discuss whether mechanical seals, lip seals, or an air or nitrogen barrier are required.

7. Consider System Integration and Variable-Speed Control

Some applications benefit from integrating a dry screw pump with a Roots booster, gas treatment equipment, condensers, filters, or other vacuum-system components. Variable-frequency drive control can also adjust the pump speed according to process demand.

Confirm the permitted speed range and operating limits with the manufacturer. Prolonged operation at low speed may affect the temperature balance of processes involving condensable vapors.

Before Requesting a Quotation:
  • Required operating pressure and ultimate pressure.
  • Required pumping speed or gas throughput.
  • Process gas composition and concentration.
  • Gas inlet temperature and vapor content.
  • Dust, condensate, and liquid carryover conditions.
  • Required materials and corrosion protection.
  • Operating hours, cooling conditions, and installation environment.

8. Maintenance and Operating Considerations

Although a dry screw vacuum pump does not require oil inside its pumping chamber, it still needs routine inspection and proper operating conditions. Preventive maintenance helps maintain stable performance and reduces the risk of unexpected shutdowns.

1. Monitor Operating Temperature

Check the pump's operating temperature and cooling-water conditions regularly. Insufficient cooling can increase thermal stress and affect rotor clearances. Keep the cooling system clean and maintain the flow rate recommended for the selected model.

2. Inspect Bearings and Timing Gears

Bearings and timing gears are important mechanical components. Follow the manufacturer's lubrication and inspection schedule for components outside the pumping chamber. Unusual vibration, noise, or temperature changes should be investigated promptly.

3. Check Shaft Seals and Purge Systems

Inspect the shaft sealing system for leakage, wear, and abnormal operating conditions. If an air or nitrogen barrier is installed, verify the purge supply and pressure according to the manufacturer's instructions.

4. Prevent Dust and Liquid Ingress

High dust concentrations and sudden liquid ingress can affect pump operation. Install suitable filters, separators, or protective equipment when required by the process. The inlet protection system should be designed according to the particle size, liquid load, and gas flow.

5. Follow the Recommended Startup and Shutdown Procedures

Use the manufacturer's recommended startup and shutdown sequence. For solvent-rich or condensable processes, the system may require a purge or flushing procedure to reduce the risk of deposits and condensation after operation.

6. Keep Maintenance Records

Record operating pressure, temperature, vibration, cooling-water conditions, service work, and replacement parts. These records help identify performance changes and support preventive maintenance planning.

DV Vacuum dry screw vacuum pump system

9. DV Vacuum Dry Screw Vacuum Pump Solutions

DV Vacuum provides industrial vacuum equipment, including constant-pitch and variable-pitch dry screw vacuum pumps. Its DVS series is designed for oil-free pumping applications involving industrial gases, selected condensable vapors, and processes requiring continuous vacuum operation.

The product range offers different pumping capacities, motor powers, cooling configurations, and anti-corrosion options. Depending on the process requirements, the pumps can also be integrated with Roots vacuum boosters to form a higher-capacity vacuum system.

Constant-Pitch DVS Dry Screw Vacuum Pump

The DVS Constant-Pitch Dry Screw Vacuum Pump series includes four models: DVS-150, DVS-300, DVS-450, and DVS-600.

According to the product specifications, the series provides pumping speeds from 150 to 600 m³/h, with a stated ultimate pressure of 10 Pa. Motor power ranges from 4 kW to 18.5 kW, depending on the model.

Specification DVS-150 DVS-300 DVS-450 DVS-600
Pumping Speed (m³/h) 150 300 450 600
Ultimate Pressure (Pa) 10 10 10 10
Motor Power (kW) 4 / 5.5 7.5 / 11 15 18.5
Inlet Size (DN) 40 50 80 100
Outlet Size (DN) 32 40 50 65

The series features a water-jacketed cooling system and configurable shaft seals. Available anti-corrosion options include electroless nickel plating, Hastelloy diffused coatings, and dual-layer PEK coatings. These options should be selected according to the actual process medium and operating conditions.

For detailed model information, refer to the DVS Constant-Pitch Series product page.

Variable-Pitch DVS Dry Screw Vacuum Pump

The DVS Variable-Pitch Dry Screw Vacuum Pump series covers seven models: DVS-160V, DVS-230V, DVS-320V, DVS-450V, DVS-650V, DVS-800V, and DVS-1100V.

Its stated pumping speed range is 160 to 1,100 m³/h, with an ultimate pressure of 10 Pa. Motor power ranges from 4 kW to 30 kW, depending on the model. The variable-pitch rotor design provides internal compression intended to help manage discharge heat and energy consumption under process loads.

Specification DVS-160V DVS-320V DVS-650V DVS-1100V
Pumping Speed (m³/h) 160 320 650 1,100
Ultimate Pressure (Pa) 10 10 10 10
Motor Power (kW) 4 7.5 15 22 / 30
Inlet Size (DN) 40 50 100 125
Outlet Size (DN) 32 40 65 65

The variable-pitch series also offers water-jacketed cooling, configurable shaft sealing, and optional corrosion-resistant coatings. It can be integrated with Roots vacuum pumps to support higher-capacity vacuum systems.

For the full model range and technical details, visit the DVS Variable-Pitch Series product page.

Technical Support and Configuration

Choosing between different DVS models requires an assessment of the required pumping speed, operating pressure, gas composition, cooling conditions, and installation environment. Strongly corrosive gases, high dust concentrations, flammable media, and heavy liquid carryover may require additional configuration or protective equipment.

DV Vacuum also lists remote technical support, video commissioning, spare-parts supply, and a 12-month warranty for the DVS product range. Confirm the applicable service terms and configuration details when requesting a quotation.

10. Frequently Asked Questions

1. What is a dry screw vacuum pump used for?

A dry screw vacuum pump is used to generate oil-free vacuum in industrial processes. Typical applications include vacuum distillation, solvent recovery, drying, concentration, pharmaceutical production, semiconductor processing, photovoltaic manufacturing, and industrial furnace operations.

2. How does a dry screw vacuum pump create a vacuum?

It uses two synchronized screw rotors that rotate in opposite directions without contacting each other. The rotors capture gas at the inlet, transport it through the pumping chamber, compress it according to the rotor geometry, and discharge it through the exhaust port.

3. Why is a dry screw vacuum pump called oil-free?

It is called oil-free because the pumping chamber does not use oil as a sealing or compression medium. Some external mechanical components, such as bearings or gears, may still require lubrication, but they are isolated from the process gas by the pump's sealing arrangement.

4. Can a dry screw vacuum pump handle solvent vapors?

Yes, selected dry screw vacuum pump configurations can handle solvent vapors. However, compatibility depends on vapor concentration, temperature, pressure, condensation risk, chemical properties, and the pump's materials and sealing arrangement. The process conditions should be reviewed before selecting a model.

5. What is the difference between constant-pitch and variable-pitch dry screw pumps?

Constant-pitch designs use a consistent screw pitch along the rotor length, while variable-pitch designs use changing pitch to provide internal compression as gas moves through the pump. Their performance characteristics differ, so selection should be based on the process requirements and manufacturer specifications.

6. Do dry screw vacuum pumps require cooling water?

Many industrial dry screw vacuum pumps use water-jacketed cooling to control operating temperature during continuous operation. The required water flow, temperature, and connection size vary by model. Always follow the manufacturer's cooling specifications.

7. Can a dry screw vacuum pump be used with a Roots vacuum booster?

Yes. A dry screw vacuum pump can serve as a backing pump in a system with a Roots vacuum booster. This combination can increase overall pumping speed and improve evacuation performance for suitable applications. The complete system should be sized according to the required pressure and gas throughput.

8. How do I select the right dry screw vacuum pump size?

Start with the required operating pressure, pumping speed, chamber volume, gas throughput, and pump-down time. Then assess gas composition, temperature, condensable vapor content, dust load, and duty cycle. Compare the manufacturer's performance curves and confirm the model with its technical team.

9. What maintenance does a dry screw vacuum pump need?

Maintenance generally includes checking cooling-water conditions, bearings, timing gears, shaft seals, purge systems, vibration, and operating temperature. The pumping chamber does not require routine oil changes, but external lubricated components still need maintenance according to the manufacturer's instructions.

10. What information should I provide when requesting a quotation?

Provide the required vacuum pressure, pumping speed, gas composition, inlet temperature, vapor and dust content, operating hours, cooling conditions, and installation environment. Also specify whether you need a standalone pump or a complete vacuum system with a Roots booster and accessories.

11. Conclusion

A dry screw vacuum pump uses synchronized, non-contacting screw rotors to transport and compress gas without sealing oil in the pumping chamber. Its oil-free design helps reduce process contamination and makes it suitable for selected chemical, pharmaceutical, electronics, new-energy, drying, and solvent recovery applications.

When selecting a pump, buyers should evaluate the required vacuum pressure, pumping speed, gas composition, condensation risk, corrosion protection, cooling system, and sealing configuration. Constant-pitch and variable-pitch designs offer different compression characteristics, so the right choice depends on the actual process conditions rather than nominal capacity alone.

DV Vacuum offers DVS constant-pitch and variable-pitch dry screw vacuum pump models, with pumping speeds ranging from 150 to 1,100 m³/h across the two product series and a stated ultimate pressure of 10 Pa. Its product options include water-jacketed cooling, configurable sealing systems, corrosion-resistant coatings, and integration with Roots vacuum boosters.

If you are planning an industrial vacuum project, contact DV Vacuum with your process details to discuss the appropriate pump model, material configuration, and system requirements.

Contact DV Vacuum for a Technical Consultation