Home/ Products / Liquid Ring Vacuum Pumps
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series
Liquid Ring Vacuum Pump DLRC Series

Liquid Ring Vacuum Pump DLRC Series

Product Overview

Key Specifications

  • Pumping Speed: 80 to 738 m³/h displacement across the product line.
  • Ultimate Pressure: Down to 3300 Pa (33mbar) for demanding continuous vacuum duty.
  • Motor Power:4 kW to 37 kW.
  • Cooling System: Water is used as the working medium for cooling.
  • Shaft Sealing: All Mechanical Seals.

Design & Features

  • Two‑stage:Gas discharged from the first‑stage flows into the second‑stage suction port. Secondary compression further handles the gas before final exhaust.
     Mechanism:The second stage lowers discharge pressure of the first stage, greatly boosting the ultimate.
     suction vacuum of the pump:Two‑stage impellers share one coaxial shaft. Intermediate disc and connecting pipe form inter‑stage gas channel for compact overall structure.

Typical Applications: Laboratory Vacuum、Soil Purification、Liquid Degassing、Food Processing、Vacuum Packaging、Solvent Recovery、Extraction、Leather Manufacturing.


Contact Us Now

Product Introduction

DLRC two‑stage liquid‑ring vacuum pumps adopt two‑stage compression for stable pumping speed at high vacuum. Efficiency is 35%‑40% higher than single‑stage models under high‑vacuum conditions with lower energy consumption.


Working Principle

  • • Working Principle: Features eccentric‑mounted pump casing and impeller. Rotating impeller generates an eccentric liquid ring. Periodic volume change between blades, cooperating with fixed suction & discharge ports, realizes gas suction, compression and discharge.
  • • Two‑stage Compression Logic: Gas discharged from the first‑stage discharge port enters the second‑stage suction port for re‑compression and exhaust. The second stage lowers discharge pressure of the first stage to improve ultimate vacuum of primary suction.
  • • Coaxial Series‑connected Layout: The two stages are arranged in coaxial series. Air passage between stages is composed of intermediate disc and connecting pipe, delivering compact overall structure.
  • • Main Components: Rotating assembly consists of one shaft plus two‑stage impellers. Stationary parts include inlet‑outlet housing, two pump rings, distribution plates and bearing supports.


Design Features

  • • Impeller‑Shaft Locking:The impeller is locked onto the shaft.

    • Mechanical Shaft Seal: Mechanical shaft seal delivers high‑reliability sealing performance with low friction loss.

    • Anchored Tie‑rod Design: Centrally anchored tie‑rod structure facilitates maintenance; complete pump disassembly is not required.

    • Precision Manufacturing: Precision casting and CNC machining eliminate the need for sealing gaskets.

  • • Replaceable End Cover Plate: Adopt replaceable end cover plates.


Technical Data

Table‑listed performance parameters are based on 20 ℃ saturated air suction, 15 ℃ water as working liquid and 1013 mbar exhaust pressure.
Technical Specifications Pumping Speed(m³/h) Ultimate Pressure(mbar) Speed(r/min) Motor Power(kw)Flow Rate(L/min) Port Size Weight(kg)
DLRC-8080331450410-15DIN40200
DLRC-150150 3314607.515-20DIN40265
DLRC-320320 3314651125-30DIN50480
DLRC-500500 33147018.535-40 DIN80740
DLRC-600600 3314702240-50DIN80850
DLRC-100138 3314655.515-20ANSI-40164
DLRC-125198 3314607.515-20ANSI-40189
DLRC-2002823314651125-30ANSI-50279
DLRC-3004143314601530-35ANSI-50321
DLRC-525738339853750-60ANSI-80663


Product FAQs

1. How to Select Two‑stage vs Single‑stage Liquid‑ring Vacuum Pumps?

Two‑stage and single‑stage liquid‑ring vacuum pumps apply to different conditions.Single‑stage pumps suffer heavy pumping‑speed decay below 20000 Pa. At 5000‑10000 Pa, pumping‑speed falls below 30% of maximum, featuring low efficiency and high power consumption.

Two‑stage models achieve higher pumping speed at high vacuum or maintain high vacuum across wide pumping‑speed range. Efficiency is 35%‑40% higher with lower energy consumption, ideal as backing pumps for Roots vacuum pumps.

2. How does it prevent cavitation damage?
A standard cavitation protection port eliminates noise and protects internal components.
3. Is it suitable for corrosive environments?
Yes. It features a standard SS impeller, with full SS wet parts available for harsh conditions.
4. What ensures its high efficiency and long life?
A unique PTFE flexible exhaust port prevents over-compression and maximizes durability.

Performance Curves

The above performance curves are obtained under the following conditions: suction medium of saturated air at 20°C, water as the
working liquid at 15°C, and an exhaust pressure of 1013 mbar.



Dimensions

0
Comments
Share your thoughts   Showing 6 of 0 reviews
Leave a Comment
Your email address will not be published. Required fields are marked *
Name can't be empty
Email error!
Submit Comment

Get in Touch with Us

Name can't be empty
Email error!
Message can't be empty
Captcha Error!
Send Your Message

Related Products

Contact Us Now
Name can't be empty
Email error!
Message can't be empty
Send Message